Wemos D1 mini Pin mapping
I've been using the Wemos D1 mini for several home automation projects. Unforunately the pin designations on the board don't match what Tasmota uses. I was able to track down the Wemos D1 mini pin mappings to create a cheat sheet.
Label | GPIO |
---|---|
D0 | 16 |
D1 | 5 |
D2 | 4 |
D3 | 0 |
D4 | 2 |
D5 | 14 |
D6 | 12 |
D7 | 13 |
D8 | 15 |
RX | 3 |
TX | 1 |
A0 | ADC0 |
Bolded pins can be used for any project without limitation, other pins can be used but may have some limitations.